The Nikon 14-24 f/2.8 and the Tamron 15-30 f/2.8 are two of the most popular wide angle zoom lenses on the market (at the time of writing.) and NiSi offers a 150mm filter holder custom designed for them.
Both lenses can take advantage of the adapter ring that also allows you to mount these holders onto any other lens with 77 or 82mm thread. If there is a need to use the holder with a threaded lens less than 77mm, it is possible to use a third-party adapter ring that reduces from 77/82mm to the required diameter. In this way it is possible to use the same holder and the same 150mm filters on multiple lenses.
Filter holder holder for Nikon 14-24mm f/2.8G
The holder for the Nikon 14-24 is made of lightweight aeronautical aluminium to give it maximum strength and portability. The inside of the holder is coated with anti-reflective matte paint and is built with grooves to limit light reflection.
The two rear screws tighten the rubber coated ring to firmly lock the holder on the barrel without scratching the lens and thereby preventing light from polluting the shot.
The holder allows you to mount 3 x 150mm wide filters without vignetting at 14mm on Full Frame. Using this holder you will have the entire range of high quality IR filters by NiSi available to you. Including 3, 6, 10 and 15 stop ND filters, GND Hard, Medium, Soft and Reverse and the polarising square filter with Nitto technology. You can find these products at the bottom of the page.
NiSi has combined the classic 150mm Holder line with an innovative new product: the NiSi S5 holder. Finally a 150mm holder has an integrated circular polariser (removable), and it’s included in the kit! Find the S5 for Nikon 14-24 below with both Standard and Landscape polarisers, more information on the dedicated page.
Filter holder holder for Tamron 15-30mm f/2.8 Di VC USD
The holder for the Tamron 15-30mm f/2.8 shares all the characteristics of the holder for the Nikon 14-24 f/2.8. The construction is in light and resistant aluminium, with matte paint and anti-reflection grooves. The mount has been specially designed for the Tamron 15-30mm, so as to be perfectly compatible with this lens. The tailor-made construction optimises the design of the lens and the facility to mount 3 filters 150mm wide without vignetting at 15mm on full frame makes this a full functional system.
NiSi has combined the classic 150mm Holder line with an innovative new product: the NiSi S5 holder. Finally a 150mm holder has an integrated circular polariser (removable), and it’s included in the kit! You can find the S5 for Tamron 15-30 below with both Standard and Landscape polarisers, more information on the dedicated page.
Adapter rings to mount the holders for Nikon 14-24 and Tamron 15-30 on other lenses
The advantage of being able to use a single holder with many lenses is undeniable, for this reason NiSi has created an adapter ring compatible with its two most popular holders: the holder for the Nikon 14-24 and the Tamron 15-30. The ring is available in 77 and 82mm; after screwing it onto the lens you can mount the holder as you would have done on the Nikon 14-24 or Tamron 15-30, simply by pulling the screws and closing the jaws on the ring. If there is a need to mount the ring on other lenses as well, it is possible to use a third-party step down ring.
The adapter rings for the classic Holder and NiSi S5 holder are different and you can find them below:
Here are the adapters for the NiSi S5 Holder:
ND, GND, polarising filters and housings for the 150mm system
The NiSi 150mm filter range is comprehensive. The filter holders for Nikon 14-24 and Tamron 15-30 are compatible with 150mm filters of other brands, but it would be a shame not to benefit from the quality of NiSi Lens Grade optical glass!
We offer a complete range of ND’s and GND’s with Nano Coating, IR blocking and anti-reflection treatment.
Discover our ND filters 150x150mm, GND 150x170mm and NiSi Natural Night 150x150mm.
